USBIT v1.82: Error with failure on initialization of Verify pass
Posted: Sat Mar 26, 2022 7:59 pm
UPDATED - Please see Additional Information at the bottom of this post.
Consistent error, regardless of two different brands and sizes of flash drives used (128 MB FAT32, 4 GB NTFS).
OS: Windows 10 Pro 64-bit, 21H1, OS build 19043.1586. All current MS updates. Only Antivirus is Win10-native A/V.
Windows File Explorer NOT open on the flash drive.
Backup (only) of both drives to uncompressed and compressed images complete successfully.
If set to backup AND verify, the process fails at the beginning of the Verify pass with the pop-up error message:
"Could not seek the USB device (Code: 6)! The handle is invalid."
Even with a failed verify, the image would seem to be OK (haven't tried to restore, though).
The debug logs for successful backup and failed backup & verify are identical (I copied to text files and performed a file compare at the command prompt). No entries appear to be made in the debug log after the device rescan, therefore no differences between the two debug logs.
Debug log from failed backup & verify:
FD01: \\?\usbstor#disk&ven_chipsbnk&prod_flash_disk&rev_2.00#7&c9700fa&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
FD02: Chipsbnk Flash Disk USB Device
FD04: Device ID is USBSTOR\DISK&VEN_CHIPSBNK&PROD_FLASH_DISK&REV_2.00\7&C9700FA&0
FD05: Media Type is 11
FD06: Location Port_#0003.Hub_#0004
FD07: Hardware ID USB\VID_0204&PID_6025&REV_0100
FD08: Device Number is 1
FD09: FOUND!
FD01: \\?\ide#disktoshiba_mk5065gsx_______________________gj002c__#4&24833bee&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
FD02: TOSHIBA MK5065GSX
FD04: Device ID is IDE\DISKTOSHIBA_MK5065GSX_______________________GJ002C__\4&24833BEE&0&0.0.0
FD05: Media Type is 12
FD06: Location PCI bus 0, device 31, function 2
FD07: Hardware ID PCI\VEN_8086&DEV_3B29&SUBSYS_1439103C&REV_05
FD08: Device Number is 0
FV01: \\?\storage#volume#{9c43e216-ddf6-11df-ac60-806e6f6e6963}#0000000000100000#{53f5630d-b6bf-11d0-94f2-00a0c91efb8b}
FV02: Device number is 0
FV01: \\?\storage#volume#{9c43e216-ddf6-11df-ac60-806e6f6e6963}#000000000c800000#{53f5630d-b6bf-11d0-94f2-00a0c91efb8b}
FV02: Device number is 0
FV01: \\?\storage#volume#_??_usbstor#disk&ven_chipsbnk&prod_flash_disk&rev_2.00#7&c9700fa&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}#{53f5630d-b6bf-11d0-94f2-00a0c91efb8b}
FV02: Device number is 1
FV03: Volume match PCI bus 0, device 31, function 2
FV04: Partition number is 1
FV05: Volume name is \\?\Volume{51c230de-a073-11ec-b11c-a8019d88a037}\ (IFL_3_50)
FV06: Volume path is G:\
FV07: MATCHED!
FV01: \\?\storage#volume#{9c43e216-ddf6-11df-ac60-806e6f6e6963}#000000746a400000#{53f5630d-b6bf-11d0-94f2-00a0c91efb8b}
FV02: Device number is 0
FV01: \\?\storage#volume#{9c43e216-ddf6-11df-ac60-806e6f6e6963}#0000007029900000#{53f5630d-b6bf-11d0-94f2-00a0c91efb8b}
FV02: Device number is 0
FV01: \\?\ide#cdromhp_dvd_rw_ad-7701h______________________2.86____#4&24833bee&0&0.1.0#{53f5630d-b6bf-11d0-94f2-00a0c91efb8b}
FV02: Device number is 0
======================================================================================================================
EDIT: Additional information
I just formatted (full, not quick) the 4 GB NTFS flash drive and copied files to it.
After transferring the files and deleting them on the flash drive, I quick formatted it.
I then performed a Restore AND Verify of the previous compressed (.imz) 4 GB NTFS image and it verified without any errors. Also, as you would predict, the restored image booted and worked as expected.
So, the Verify error and failure would seem to be limited to the BACKUP process!
I hope that all the above is helpful.
Consistent error, regardless of two different brands and sizes of flash drives used (128 MB FAT32, 4 GB NTFS).
OS: Windows 10 Pro 64-bit, 21H1, OS build 19043.1586. All current MS updates. Only Antivirus is Win10-native A/V.
Windows File Explorer NOT open on the flash drive.
Backup (only) of both drives to uncompressed and compressed images complete successfully.
If set to backup AND verify, the process fails at the beginning of the Verify pass with the pop-up error message:
"Could not seek the USB device (Code: 6)! The handle is invalid."
Even with a failed verify, the image would seem to be OK (haven't tried to restore, though).
The debug logs for successful backup and failed backup & verify are identical (I copied to text files and performed a file compare at the command prompt). No entries appear to be made in the debug log after the device rescan, therefore no differences between the two debug logs.
Debug log from failed backup & verify:
FD01: \\?\usbstor#disk&ven_chipsbnk&prod_flash_disk&rev_2.00#7&c9700fa&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
FD02: Chipsbnk Flash Disk USB Device
FD04: Device ID is USBSTOR\DISK&VEN_CHIPSBNK&PROD_FLASH_DISK&REV_2.00\7&C9700FA&0
FD05: Media Type is 11
FD06: Location Port_#0003.Hub_#0004
FD07: Hardware ID USB\VID_0204&PID_6025&REV_0100
FD08: Device Number is 1
FD09: FOUND!
FD01: \\?\ide#disktoshiba_mk5065gsx_______________________gj002c__#4&24833bee&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
FD02: TOSHIBA MK5065GSX
FD04: Device ID is IDE\DISKTOSHIBA_MK5065GSX_______________________GJ002C__\4&24833BEE&0&0.0.0
FD05: Media Type is 12
FD06: Location PCI bus 0, device 31, function 2
FD07: Hardware ID PCI\VEN_8086&DEV_3B29&SUBSYS_1439103C&REV_05
FD08: Device Number is 0
FV01: \\?\storage#volume#{9c43e216-ddf6-11df-ac60-806e6f6e6963}#0000000000100000#{53f5630d-b6bf-11d0-94f2-00a0c91efb8b}
FV02: Device number is 0
FV01: \\?\storage#volume#{9c43e216-ddf6-11df-ac60-806e6f6e6963}#000000000c800000#{53f5630d-b6bf-11d0-94f2-00a0c91efb8b}
FV02: Device number is 0
FV01: \\?\storage#volume#_??_usbstor#disk&ven_chipsbnk&prod_flash_disk&rev_2.00#7&c9700fa&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}#{53f5630d-b6bf-11d0-94f2-00a0c91efb8b}
FV02: Device number is 1
FV03: Volume match PCI bus 0, device 31, function 2
FV04: Partition number is 1
FV05: Volume name is \\?\Volume{51c230de-a073-11ec-b11c-a8019d88a037}\ (IFL_3_50)
FV06: Volume path is G:\
FV07: MATCHED!
FV01: \\?\storage#volume#{9c43e216-ddf6-11df-ac60-806e6f6e6963}#000000746a400000#{53f5630d-b6bf-11d0-94f2-00a0c91efb8b}
FV02: Device number is 0
FV01: \\?\storage#volume#{9c43e216-ddf6-11df-ac60-806e6f6e6963}#0000007029900000#{53f5630d-b6bf-11d0-94f2-00a0c91efb8b}
FV02: Device number is 0
FV01: \\?\ide#cdromhp_dvd_rw_ad-7701h______________________2.86____#4&24833bee&0&0.1.0#{53f5630d-b6bf-11d0-94f2-00a0c91efb8b}
FV02: Device number is 0
======================================================================================================================
EDIT: Additional information
I just formatted (full, not quick) the 4 GB NTFS flash drive and copied files to it.
After transferring the files and deleting them on the flash drive, I quick formatted it.
I then performed a Restore AND Verify of the previous compressed (.imz) 4 GB NTFS image and it verified without any errors. Also, as you would predict, the restored image booted and worked as expected.
So, the Verify error and failure would seem to be limited to the BACKUP process!
I hope that all the above is helpful.